• DN Range of Suction Pipe: 50-400 mm (2"-16")
• DN Range of Discharing Pipe: 32-350 mm (1.5"-14")
• Flow Capacity Range: 50-5000 GPM
• Head/Pressure Range: 4-14 Bar
• Power Range: 4-325 Kw

• DN Suction size: 25-100 mm (1"-4")
• DN Discharge size: 25-100 mm (1"-4")
• Flow Capacity Range: 0.6-110m3/h
• Head/Pressure Range: 6-300m
• Power Range: 0.37-45kw

The CLDF vertical multistage pump (pump body, shaft,impeller, etc.) are made of stainless steel, which is resistant to wear and has a long service life. It is used as a stabilized pump in the fire pump system to maintain the pressure of the fire line. The pump is suitable for high temperature water supply, hot water circulation, boiler water supply, fire pressurization, high-rise building water supply and water treatment, and water purification.

• CDL/ CDLF is a kind of vertical non-self priming multistage centrifugal pump, which is driven by a standard electric motor.The inlet and outlet are located at the pump bottom at the same level.
• CDL/ CDLF takes the advantages of outstanding design of hydraulic model, high efficiency and sound energy conservation. The inside impeller, casing and other main components are all stainless steel.
• CDL/ CDLF is a kind of vertical non-self priming multistage centrifugal pump, which is driven by a standard electric motor. The motor output shaft directly connects with the pump shaft through a coupling. The pressure-resistant cylinder and flow passage components are fixed between pump head and inlet & outlet section with stay bolts.
• The electric pump is coupled with YE3 high efficient motor with protection IP55 class F, anti-corrosive coating pump case, quality NSK bearings, and wear resistance mechanical seal.
• Water treatment: Ultrafiltration system, reverse osmosis system, distillation system, separator, swimming pool.Irrigation: Farmland irrigation, spray irrigation, dripping irrigation.

• DN Suction size: 25-100 mm (1"-4")
• DN Discharge size: 25-100 mm (1"-4")
• Flow Capacity Range: 0.6-110m3/h
• Head/Pressure Range: 6-300m
• Power Range: 0.37-45kw

The CDL / CDLF Vertical multistage stainless steel pipeline for water supply system, pressure boiler water supply pump, high purity water purification system, medicine, food, fine chemical, washing, spraying device such as a water supply and hot and cold water cycle.

• CDL type is applicable to conveying non-corrosive liquid, while CDLF is suitable for slightly corrosive liquid.
• The inside impeller, casing and other main components are all stainless steel punched.
• The pump body has the advantages of stamping pump, standard impeller, small flow and high head. This kind of pump can be equipped with an intelligent protector to effectively prevent it from dry-running, out-of-phase and overload.
• This simple pump structure, simple installation and convenient maintenance.
  And 100% copper coil is used to ensure the service life of the motor.For extensive application, which can be widely used in life, industry, agriculture and other fields.
• The use medium is clear water, clean, non-corrosive, non-explosive water and physical and chemical liquids.

• DN Range of Suction Pipe: 50-400 mm (2"-16")
• DN Range of Discharing Pipe: 32-350 mm (1.5"-14")
• Flow Capacity Range: 50-5000 GPM
• Head/Pressure Range: 4-14 Bar
• Power Range: 4-325 Kw

• DN Range of Suction port: 50-400 mm (2"-16")
• DN Range of Discharing port: 32-350 mm (1.5"-14")
• Flow Capacity Range: 4-840 m3/h
• Head/Pressure Range: 19-680 m
• Power Range: 1.5-370 Kw

• DN Range of Suction port: 50-400 mm (2"-16")
• DN Range of Discharing port: 32-350 mm (1.5"-14")
• Flow Capacity Range: 4-840 m3/h
• Head/Pressure Range: 19-680 m
• Power Range: 1.5-370 Kw

• DN Range of Suction Pipe: 50-400 mm (2"-16")
• DN Range of Discharing Pipe: 32-350 mm (1.5"-14")
• Flow Capacity Range: 50-5000 GPM
• Head/Pressure Range: 4-14 Bar
• Power Range: 4-325 Kw

• DN Suction size: 25-100 mm (1"-4")
• DN Discharge size: 25-100 mm (1"-4")
• Flow Capacity Range: 0.6-110m3/h
• Head/Pressure Range: 6-300m
• Power Range: 0.37-45kw

The CLDF vertical multistage pump (pump body, shaft,impeller, etc.) are made of stainless steel, which is resistant to wear and has a long service life. It is used as a stabilized pump in the fire pump system to maintain the pressure of the fire line. The pump is suitable for high temperature water supply, hot water circulation, boiler water supply, fire pressurization, high-rise building water supply and water treatment, and water purification.

• CDL/ CDLF is a kind of vertical non-self priming multistage centrifugal pump, which is driven by a standard electric motor.The inlet and outlet are located at the pump bottom at the same level.
• CDL/ CDLF takes the advantages of outstanding design of hydraulic model, high efficiency and sound energy conservation. The inside impeller, casing and other main components are all stainless steel.
• CDL/ CDLF is a kind of vertical non-self priming multistage centrifugal pump, which is driven by a standard electric motor. The motor output shaft directly connects with the pump shaft through a coupling. The pressure-resistant cylinder and flow passage components are fixed between pump head and inlet & outlet section with stay bolts.
• The electric pump is coupled with YE3 high efficient motor with protection IP55 class F, anti-corrosive coating pump case, quality NSK bearings, and wear resistance mechanical seal.
• Water treatment: Ultrafiltration system, reverse osmosis system, distillation system, separator, swimming pool.Irrigation: Farmland irrigation, spray irrigation, dripping irrigation.

• DN Suction size: 25-100 mm (1"-4")
• DN Discharge size: 25-100 mm (1"-4")
• Flow Capacity Range: 0.6-110m3/h
• Head/Pressure Range: 6-300m
• Power Range: 0.37-45kw

The CDL / CDLF Vertical multistage stainless steel pipeline for water supply system, pressure boiler water supply pump, high purity water purification system, medicine, food, fine chemical, washing, spraying device such as a water supply and hot and cold water cycle.

• CDL type is applicable to conveying non-corrosive liquid, while CDLF is suitable for slightly corrosive liquid.
• The inside impeller, casing and other main components are all stainless steel punched.
• The pump body has the advantages of stamping pump, standard impeller, small flow and high head. This kind of pump can be equipped with an intelligent protector to effectively prevent it from dry-running, out-of-phase and overload.
• This simple pump structure, simple installation and convenient maintenance.
  And 100% copper coil is used to ensure the service life of the motor.For extensive application, which can be widely used in life, industry, agriculture and other fields.
• The use medium is clear water, clean, non-corrosive, non-explosive water and physical and chemical liquids.

• DN Range of Suction Pipe: 50-400 mm (2"-16")
• DN Range of Discharing Pipe: 32-350 mm (1.5"-14")
• Flow Capacity Range: 50-5000 GPM
• Head/Pressure Range: 4-14 Bar
• Power Range: 4-325 Kw

• DN Range of Suction Pipe: 50-300 mm (2"-12")
• DN Range of Discharing Pipe: 32-250 mm (1.5"-10")
• Flow Capacity Range: 0-1500m3/h
• Head/Pressure Range: 0-164 m
• Power Range: 0.75-315 Kw

• DN Range of Suction Pipe: 50-150 mm (2"-6")
• DN Range of Discharing Pipe: 32-125 mm (1.5"-5")
• Flow Capacity Range: 0-1750 GPM
• Head/Pressure Range: 1-15 Bar
• Power Range: 0.75-160Kw

• DN Range of Suction Pipe: 50-300 mm (2"-12")
• DN Range of Discharing Pipe: 32-250 mm (1.5"-10")
• Flow Capacity Range: 0-1500m3/h
• Head/Pressure Range: 0-164 m
• Power Range: 0.75-315 Kw

• Suction Port : DN 32-250 mm
• Discharge Port :DN32-250 mm
• Flow/capacity:8-630m3/h(35-2770GPM)
• Head/Pressure :9-85m
• Power range: 2.2-132kw(3 -180HP)